Table of Contents
Advertisement
Item
Black Level Selector
Black Level
Gain Selector
Gain
Analog Base Gain
e) LUT Control
JAI LUT Enable
Gamma
LUT Selector
LUT Index
LUT Value
f) Transport Layer Control
Device Tap Geometry
CL Configuration
CL Time Slots Count
g) Digital IO Control
Line Selector
Line Mode
Line Format
Line Source
h) User Set Control
User Set Selector
User Set Load
User Set Save
i) JAI Custom Control
Auto Line Rate Reference
Auto Line Rate
Auto Reset Mode
Auto Internal Trigger
Pixel Black Correct
Pixel Black Detect
Pixel Gain Correct
Pixel Gain Detect
Shading Correct
Shading Detect
Shading Detect Status
Pixel Gain Detect Status
Pixel Black Detect Status
Median Filter
Setting range
All
–133 to 255
Digital All
1 to 64
0dB,
6dB,
9.54dB,
12dB
Off,
LUT,
Gamma
0.45 to 1
Luminance
0 to 256
0 to 4096
Geometry_1X2,
Geometry_1X3,
Geometry_1X4,
Geometry_1X8,
Geometry_1X10
Base, Medium, Full, EightyBit
One
Line1 - TTL Out
Output
TTL
Low, High,
Exposure Active(XEEN),
LVAL,
Line4 - TTL In,
Line7 - CC1
Default,
User Set1 to User Set3
—
—
—
On, Off
On, Off
Factory area,User area
Factory area, User area
Off, Factory area, User area
—
—
—
Off, On
— 34 —
Default value
All
0
Set the black level value.
Digital All
1
Set the gain value by multipliers.
0dB
Set the analog base gain.
Configure LUT settings.
Off
Select the JAI LUT mode.
0.45
Set the gamma value.
Luminance
Display the LUT data type.
0
Set the LUT index table number.
4096
Set the LUT value.
Display information on the transport layer.
Geometry_1X2
Set the transfer method (tap
configuration) of images transferred from
the camera at one time.
Base
Display the Camera Link configuration.
One
Display the Camera Link time slot counter.
Configure settings for digital input/output.
Line1 - TTL Out
Select the input/output to configure.
Output
Display the input/output status (whether it
is input or output).
TTL
Display the current I/F type.
Exposure
Select the line source signal for the item
Active(XEEN)
selected in [Line Selector].
Configure user settings.
Default (factory
Select the user settings.
default values)
—
Load user settings.
—
Save the current setting values as user
settings.
Configure JAI proprietary function settings.
Set the reference value used when performing
automatic level control using line periods.
—
Adjust the line rate to achieve the brightness
of the reference value.This functions only
when [Exposure Mode] is set to [Off].
Off
Set the Auto Reset Mode
Set the Auto Internal Trigger.
Off
(DSNU) Select the area to which to save the
User area
black level correction value.
(DSNU) Execute pixel black correction.
User area
(PRNU) Select the area to which to save the
gain correction value.
(PRNU) Execute pixel gain correction.
Off
Select the area to which to save the shading
correction value.
Execute shading detection.
—
Display the status.
—
(PRNU) Display the status.
—
(DSNU) Display the status.
Off
Enable / Disable the noise reduction digital
filter function.
SW-8000M-PMCL
Description
Advertisement
Table of Contents
