IAI SW-8000M-PMCL User Manual page 18

■ To save user settings
Stop image capture.
1
Expand [User Set Control] and select the save destination ([User Set1] to [User Set3]) in
2
[User Set Selector].
Note
The factory default setting values are stored in [Default] and cannot be overwritten.
Caution
Settings can only be saved when image capture on the camera is stopped.
Select [User Set Save], and click [Execute 'User Set Save' Command].
3
The current setting values are saved as user settings.
■ To load user settings
Stop image capture.
1
User settings can only be loaded when image capture on the camera is stopped.
Select the settings to load (Default, and User Set1 to User Set3) in [User Set Selector].
2
Select [User Set Load], and click [Execute 'User Set Load' Command].
3
The selected user settings are loaded.
The next time the unit is started up, the settings selected in [User Set Selector] will be loaded automatically.
— 18 —
SW-8000M-PMCL