IAI SW-8000M-PMCL User Manual page 11

SW-8000M-PMCL
v Clear the [JAI GigE Vision Filter Driver] checkbox, and save.
Verify the settings for using Camera Link.
3
The SW-8000M-PMCL supports GenIcam and Gen-CP. Check the following settings when
controlling the camera via JAI SDK.
Checking the frame grabber board's settings
Settings must be configured on the frame grabber board to enable Gen-CP support.
For details, refer to the operating instructions for each board.
Checking JAI SDK's settings
u Start JAI Control Tool, and click the
(Settings) icon at the top right.
— 11 —