Display Mad - H3C MSR Series Command Reference Manual

Field
Belong To
Related commands
display irf
display irf configuration

display mad

Use display mad to display MAD status and settings.
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed MAD information. If you do not specify this keyword, the command only
displays whether a MAD mechanism is enabled or disabled.
Examples
# Display detailed MAD information.
<Sysname> display mad verbose
Multi-active recovery state: No
Excluded ports(user-configured):
GigabitEthernet1/2/0/2
GigabitEthernet1/2/0/3
Excluded ports(system-configured):
GigabitEthernet1/2/0/4
GigabitEthernet1/2/0/5
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled interface: Route-Aggregation1
MAD status
Member ID
1
2
MAD BFD enabled interface: Route-Aggregation2
MAD status
Member ID
1
2
Description
IRF fabric that has the device, represented by the CPU MAC address of the
master in the IRF fabric.
: Normal
Port
GigabitEthernet1/2/0/1
GigabitEthernet2/2/0/1
: Normal
MAD IP address
192.168.1.1/24
192.168.1.2/24
MAD status
Normal
Normal
Neighbor MAD status
2 Normal
1 Normal
9