Setting The Monitor Focus - Omron ZX Series Operation Manual

FUN (Function) Mode

4-5-10 Setting the Monitor Focus

The monitor focus setting procedure is shown in the following figure:
Monitor focus
Intensity function
Voltage output
selected using the
ENT Key
Differentiation function
Go to the
next mode
Second point
output value
Second point
distance value
Migrate to the intensity function
136
Numeric value setting procedure is the same as
that of other FUN mode settings except for the
value shift that requires setting both output and
distance values as shown on the right:
Start the second
point focus value
setting by using
the UP, DOWN,
LEFT and RIGHT
Numeric value setting procedure is the
same as that of the first point.
Perform the monitor focus operation.
OK
selection mode.
Voltage
output
Current
output
Current output
selected using
the ENT Key
First point
output value
First point
distance value
Start the first
point focus value
setting using the
UP, DOWN,
LEFT and RIGHT
Keys
Press the ENT Key to
migrate to the second
point monitor focus
setting.
Keys.
Press the ENT Key
to complete the
monitor focus
setting.
Fail
Section 4-5
Circled characters are
the (flashing) digits to
be set.