Omron ZX Series Operation Manual page 170

Ratings/Specifications
Item
Optical system
Applicable Amplifier Units
Measurement point
Measurement range
Light source
Beam shape
Beam size (See note 1.)
Resolution (See note 2.)
Linearity (See note 3.)
Temperature characteristic
(See note 4.)
Ambient temperature
Ambient humidity
Ambient illumination
Insulation resistance
Dielectric strength
Vibration resistance
(destruction)
Shock resistance
(destruction)
Degree of protection
Connection method
Materials
Weight (packed state)
Accessories
FS: Full scale of measurement range
Note 1. Beam size: Beam size refers to the distance across the center of mea-
surement. It indicates the typical value for the distance across the cen-
ter of detection. The beam size is defined by 1/e
strength of the beam at the beam center. It may be affected by light
leakage around the main beam and by conditions in the area sur-
rounding the sensing object.
2. Resolution: The resolution is the deviation (±3σ) in the linear output
when connected to the Amplifier Unit (setting the average count to
4,096 per period, with the standard reference object set at the dis-
tance across the center).
150
ZX-LD30V
Regular reflective
ZX-LDA11/41
30 mm
±
2 mm
Visible-light semiconductor laser with a wavelength of
650 nm and an output of 1 mW max.; class 2
Spot
μ
75- m dia.
μ
0.25 m
±
0.2% FS (entire range)
0.03% FS/ ° C
±
Operating: 0 to 50 ° C, Storage: − 15 to 60 ° C
(with no icing or condensation)
Operating and storage: 35% to 85%
(with no condensation)
Incandescent lamp: 3,000 lx max. (on light receiving side)
20 M Ω min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min.
10 to 150 Hz, 0.7-mm double amplitude 80 min each in X,
Y, and Z directions
2
300 m/s 3 times each in six directions (up/down, left/right,
forward/backward)
IEC 60529, IP40
Connector relay (standard cable length: 500 mm)
Case and cover: Aluminum, Lens: Glass
Approx. 250 g
Instruction sheet, Laser warning label (English)
Section 6-1
ZX-LD30VL
Line
μ
100 m x 1.8 mm
2
(13.5%) of the