Omron ZX Series Operation Manual page 134

RUN Mode
n Incident Level Display
The incident level is displayed.
This display cannot be selected in Intensity Mode.
POINT
LEFT Key
n Resolution Display
The resolution of the linear output is displayed.
LEFT Key
The threshold value display is resumed.
114
The measured value is displayed on the
main display.
The incident level is displayed on the
sub-display. The display range is 0 to
9999. "P" is displayed in the leftmost
digit. The decimal point is not displayed.
RIGHT Key
The measured value is displayed on the
main display.
The resolution is displayed on the sub-
display.
"r" is displayed in the leftmost digit.
The display is updated at an approxi-
mately 1-second interval.
RIGHT Key
Section 4-3