Table of Contents
Advertisement
1.7 Dialling Features
Pickup Dialling (Hot Line)
Description
Allows the extension user to call a pre-determined extension or outside party automatically just
by lifting the handset.
This feature is also known as Hot Line.
If the feature is activated and the extension user goes off-hook, a dial tone is generated for the
waiting time and then dialling starts. During the waiting time the user can dial another party,
overriding the Pickup Dialling function.
Conditions
• To utilise this feature, an extension number or an outside telephone number (up to 24 digits)
should be programmed beforehand.
• This feature works only when an extension user goes off-hook from on-hook status directly.
• A rotary dial telephone without the "#" button cannot programme this feature. For
programming the phone number, temporarily replace a rotary dial telephone with a pulse
telephone with the "#" button.
• This feature does not work if the extension user goes off-hook to answer an incoming call
or retrieve a call on hold.
• This feature does not work if a message notification is left on the extension.
• For a PT with a PF 12 button, the number stored in the PF12 button is used for Pickup
Dialling.
Programming Guide References
• 2.3 Numbering Plan
–
• 2.5 System Timer
– Pickup Dial Waiting Time
• 4.3 Extension Line
– [Pickup Dialing] Mode
– [Pickup Dialing] Dial
Features Guide References
1.7 Dialling Features
• Automatic Station Release
User Manual References
• 2.2.2 Easy Dialling
190
Pickup Dialing Program / Set / Cancel
Features Guide
Advertisement
Table of Contents
