Tie Line And Outside (Co) Line Connection - Panasonic KX-TD500CE Features Manual

TIE Line and Outside (CO) Line Connection

Description
TIE Lines can be used to minimise the cost of calls to a distant location outside of the TIE Line
Network. A long distance call from one location may be a local call from another location. This
fact should be considered before making a long distance call. If the destination of the long
distance call is outside of the TIE Line Network, extension users first call to a distant PBX via
TIE Line and then can make a local CO call to the final destination through that PBX.
A Network of TIE Lines
PBX-1
PBX Code 950
Ext. 100
Call Flow
1.
Ext.100 dials 77-951-9 or 801 through 848 (TIE Line Access Code + PBX Code + CO
Access Code).
2.
Ext.100 may be required to enter a "DISA / TIE User Code" depending on the System
Programming.
3.
Ext.100 hears dial tone from an idle CO line of PBX-2.
4.
Ext.100 dials xxx-xxxx (phone number of the outside party).
Programming example:
To make up the TIE Line Network above, the following System Programming is required at
PBX-1 and -2 respectively.
PBX–1
• 8.2 TIE Routing Table
– PBX Code
No. Leading
Digit
01
02
Step 2 is required when "TIE-to-CO Security Mode" is set to "Yes" at PBX-2.
*1
Features Guide
TIE Line
TG10
Inside of the TIE Line Network
*1
Digits to Number to
delete be added
951 0
PBX-2
TG09
TG10 CO
PBX Code 951
Trunk Group No.
01 02
10
3.1 E&M Features
Outside Party
xxx-xxxx
03 04 05
355