Table of Contents
Advertisement
Host PBX Access
Description
The system may be installed behind an existing host PBX. This is performed by connecting
(extension) lines from the host PBX to CO line ports of the KX-TD500 System.
Conditions
• To enable Host PBX Access, put the host PBX line in a Trunk Group. The extension user
can access the host PBX by selecting that CO line.
• Host PBX Access Code
A Host PBX Access Code is required to access CO lines of the host PBX for making an
outside call.
• Automatic Pause Insertion
A pause, if programmed, can be inserted between the user-dialled Host PBX Access Code
and the following digits. Programme the pause time required by the Host PBX for that
Trunk Group.
• External Feature Access
Access to the host PBX during a conversation is also possible.
Programming Guide References
• 3.2 Trunk Group
– Pause Time
– PBX Access Code
Features Guide References
1.7 Dialling Features
• Pause Insertion, Automatic
1.12 Conversation Features
• External Feature Access
User Manual References
• 2.8.2 If a Host PBX is Connected
Features Guide
1.3 System Features
41
Advertisement
Table of Contents
