Table of Contents
Advertisement
1.7 Dialling Features
One-Touch Dialling
Description
One-Touch Dialling offers the PT user One-Touch access to a desired party or system feature
by storing an extension number, telephone number, account code or a feature number (up to 24
digits) in a One-Touch Dialling button. The number of buttons available depends on the type
of PT. One-Touch Dialling buttons can be programmed to flexible buttons: CO, DSS or PF
(Programmable Feature).
Conditions
• Combination dialling
Speed Dialling, One-Touch Dialling, manual dialling, Last Number Redial and Saved
Number Redial can be used together in a combination.
• Storing more than 25 digits
It is possible to store a number consisting of 25 digits or more by dividing it and storing it
in two One-Touch Dialling buttons. In this case, a CO line access code should be stored in
the first button.
• Full One-Touch Dialling
If "Full One-Touch Dialling" is enabled, press the One-Touch Dialling button directly
without going off-hook.
• To store the telephone number of an outside party, a line access code (9: [SP], 0: [NL], [JT]
or 801 through 848) must be stored as the leading digit.
Programming Guide References
• 4.3 Extension Line
– CO Key
– PF Key
• 4.4 DSS Console
– DSS Key
– PF Key
Features Guide References
1.7 Dialling Features
• Full One-Touch Dialling
User Manual References
• 2.2.2 Easy Dialling
• 4.1.1 Initial Settings
• 4.1.2 Customising the Buttons
• 4.3.5 Flexible CO Button Assignment (005)
188
Features Guide
Advertisement
Table of Contents
