Digital Super Hybrid System KX-TD208E Added and Changed Features for Operating Instructions In this manual, the last letter ÒEÓ of each model number is omitted.
Others Others Before Leaving Your Desk Forwarding a Call (Call Forwarding) ESCRIPTION By the ISDN Service All calls to your MSN number are forwarded by the ISDN. Ð all calls By the ISDN Service Calls to your MSN are forwarded when you are busy, by the Ð...
Others Others Denying Receiving Calls Rejecting Incoming Calls (Do Not Disturb (DND)) You can reject calls using the following method. SLT and PT On-hook Off-hook Dial 7101. Confirmation Dial tone FWD/DND Confirmation On-hook Press Off-hook Dial 1. Dial tone FWD/DND. ¥...
Others Caller Identification Services (for KX-T7230 / KX-T7235) Displaying the CallerÕs Information (Caller ID) Provides you with the callerÕs telephone number and name if you have subscribed to the calling line identification service. You can record the caller's telephone number (and name if assigned) into the call log by pressing LOG button.
Page 9
Others isplay while dialling Off-hook or press SP-PHONE and dial dialled phone number 384010 an outside line access code + the phone Manual dialling - after 15 seconds number. Pressing REDIAL button changes - Immediately automatically Other quick diallings - after 10 seconds call duration CO 01 12:00Õ30...
Others ¥ System Programming (Section 3.4) [107] Charge Indication Selection ¥ ISDN Port Programming (Section 3.7) [404] CLIP / COLP Number Assignment Selecting the CLIP / COLP numbers You can select the CLIP / COLP numbers to be displayed to the other party depending on business or private use.
System Management ISDN-T Accessing to Other Types of Network Connected to the ISDN To access other types of network from the ISDN, sending out DTMF may be needed. To send out the dialled number in DTMF, you must insert a PAUSE (Ò Ó).
System Management ISDN-T Direct Dialling In (DDI) Allows the external caller to connect to an extension in the system directly. Assignable desti- nations are: Operator, extension, or extension group. This requires a DDI number transmitted from the ISDN network. The DDI number is converted to a specific extension number by using a pre-programmed conversion table.
System Management ISDN-T Forwarding a Doorphone Call to the Outside line You can automatically transfer an incoming doorphone call to a preset outside destination. ¥ Even if you set other Call forwarding, this settings are available if pre-programmed by System Programming. ¥...
System Management ISDN-T Removing and Adding the Dialled Number for LCR The dialled number is modified for sending out to the least expensive carrier. See below as an example. The number transmitted Dialled Number to the network 92-477-7777 12392-477-7777 092-477-7777 By [708] LCR By [709] LCR Modify Removed...
System Management To activate this feature, please add the following new System Programming to the LCR Routing Plan Tables (Routes 1 through 4) (6) LCR Modify Removed Digit (Program [708]) This is used to remove the digits of the dialled number before sending to the exchange line.
[517][614]-[615][708] System Programming [517] Call Forwarding by ISDN Service Enables or disables the Call Forwarding by ISDN Service function on a Class of Service (COS) basis. COS no. (1ááá2) (1ááá4, ) X Ð Selection number: 1 (Enable) / 2 (Disable) All COS Ð...
System Programming [709][902][903] [709] LCR Modify Added Number Determines how the dialled number should be modified before sending to the exchange line. Numbers are added to the beginning of the dialled number. route no. number to be added (1ááá4) (0ááá9, 9 digits maximum) ¥...
Other added items Section of O/I Feature Title Item 2.3 Making Calls Quick Dialling Please add the following to the conditions. (P2-15) Dialling Simply by ¥ If there is a PAUSE in the assigned numbers, the Pressing a Button numbers after the PAUSE are sent as DTMF sig- (One-Touch Dialling) nals.
Section of O/I Feature Title Item 3.10 LCR [702] LCR Route Please add the following to the conditions. Programming Selection Code ¥ To delete the current entry, press # after entering (P3-46) [706] LCR Route the area code. Exceptional Code 3.10 LCR [703] LCR Please add the following to the conditions.
[404][412] System Programming The whole programming content has been changed except the programming address. [404] CLIP / COLP Number Assignment Assigns the Calling Line Identification Presentation (CLIP) and Connected Line Identification Presentation (COLP) numbers, classifying into the business and private modes. ISDN port no.
Please change the word, Toll Restriction into Call Barring on the following pages. Section of O/I Feature Title P8-9, Contents 2.3 Making Calls (P2-12, 14) Outside Calling (P2-16) Quick Dialling 2.6 Others (P2-53...54) Calling with Account Codes (Account Code Entry) (P2-67...68) Switching the Day/Night Calling Mode (Night Service)
Other changed items Section of O/I Feature Title Item 2.3 Making Calls Quick Dialling Please replace as follows in the conditions; (P2-17) Dialling with a Station ¥..Enter Ò Ó for a ÒÐÓ (hyphen). 2.3 Making Calls Speed Dialling Button (P2-18) (Station Speed Dialling) ¥...
Section of O/I Feature Title Item 2.6 Others Privacy Feature Please change the name of the following program- (P2-62, 63) ming address 3.1 System System Data Default [404] Subscriber Number Assignment Management (P3-16) [404] CLIP/COLP Number Assignment 3.12 Optional [901] System Data Programming Clear Except (P3-50)
3.14 Programming Tables [404] CLIP/COLP Number Assignment Not Stored Default : all CLIP no. (Business) CLIP no. (Private) Port 1 Port 2 Port 1 Port 2 Ext. 21 300 or 30 [404] CLIP/COLP Number Assignment Not Stored Default : all COLP no.
Page 27
3.14 Programming Tables [412] ISDN DDI Number/Extension Number Transformation Not Stored Default : all DDI no. (Port 1) DDI no. (Port 2) Ext. 291 300 or 30 [412] ISDN DDI Number/Extension Number Transformation Not Stored Default : all DDI no. (Port 1) DDI no.
Page 28
3.14 Programming Tables [408] Extension Ringing Assignment Ð Day for [409] Extension Ringing Assignment Ð Night ISDN for ISDN Extension All ISDN ports ISDN port 1 ISDN port 2 All ISDN ports ISDN port 1 ISDN port 2 Loc No. Def.
Page 29
3.14 Programming Tables [408] Extension Ringing Assignment Ð Day for [409] Extension Ringing Assignment Ð Night ISDN for ISDN Extension All ISDN ports ISDN port 1 ISDN port 2 All ISDN ports ISDN port 1 ISDN port 2 Loc No. Def.
Page 30
3.14 Programming Tables [408] Extension Ringing Assignment Ð Day for [409] Extension Ringing Assignment Ð Night ISDN for ISDN Extension All ISDN ports ISDN port 1 ISDN port 2 All ISDN ports ISDN port 1 ISDN port 2 Loc No. Def.
Page 31
3.14 Programming Tables [408] Extension Ringing Assignment Ð Day for [409] Extension Ringing Assignment Ð Night ISDN for ISDN Extension All ISDN ports ISDN port 1 ISDN port 2 All ISDN ports ISDN port 1 ISDN port 2 Loc No. Def.
Page 32
3.14 Programming Tables [702] LCR Route Selection Code Area Code (6 digits max.) Area No. Default : All Ð Not Stored Route 1 Route 2 Route 3 Route 4...
Page 33
3.14 Programming Tables [702] LCR Route Selection Code Area Code (6 digits max.) Area No. Default : All Ð Not Stored Route 1 Route 2 Route 3 Route 4...
Page 34
3.14 Programming Tables [706] LCR Route Exceptional Code Area Code (6 digits max.) Area No. Default : All Ð Not Stored Route 1 Route 2 Route 3 Route 4...
Page 35
3.14 Programming Tables [706] LCR Route Exceptional Code Area Code (6 digits max.) Area No. Default : All Ð Not Stored Route 1 Route 2 Route 3 Route 4...