Table of Contents
Advertisement
1.6 Originating Features
1.6 Originating Features
Alternate Calling – Ring / Voice
Description
Allows an extension user either to ring-signal (Ring call) or voice-signal (voice call) the other
PT extensions.
Ring call: The called PT rings.
Voice call: The caller's voice is heard through the built-in speaker of
The calling extension user can switch ring-signalling to voice-signalling and vice versa by
pressing " " during an intercom call.
Conditions
• Mode Selection
The PT user can select either to be ring-signalled or voice-signalled by Station
Programming.
• Any extension user (PT, SLT) can use this feature during an intercom call if destination
extension is a PT.
• One time switching
Switching of signalling mode is available only once during a call.
• Voice-signalling is not available in the following cases:
– if the other extension is an SLT.
– if the other extension is busy on another call.
– if another call is ringing on the other extension.
Programming Guide References
System programming is not required.
Features Guide References
1.9 Answering Features
• Hands-free Answerback
User Manual References
• 2.2.6 Alternating the Calling Method (Alternate Calling — Ring / Voice)
• 4.1.1 Initial Settings
140
the called PT instead of ringing.
Features Guide
Advertisement
Table of Contents
