Table of Contents
Advertisement
Hands-free Operation
Description
Allows the PT user to dial and to talk to the other party without lifting the handset. Pressing an
appropriate button provides hands-free mode.
Conditions
• This function can be utilised by pressing a button listed below when the SP-PHONE /
MONITOR button indicator is off:
– SP-PHONE button
– MONITOR button
– INTERCOM button
– CO button
– DN button
• The hands-free mode is cancelled if nothing is dialled within 10 seconds.
• PT with MONITOR button
The PT with MONITOR button can be used for hands-free dialling operations, etc., but
cannot be used for a hands-free conversation.
• Full One-Touch Dialling
A single press of a One-Touch Button, DSS button, REDIAL button or a SAVE button also
provides the hands-free mode if Full One-Touch Dialling is activated.
Programming Guide References
System programming is not required.
Features Guide References
1.7 Dialling Features
• Full One-Touch Dialling
User Manual References
• 2.3.1 Answering Calls
Features Guide
1.12 Conversation Features
257
Advertisement
Table of Contents
