Canon imageRUNNER 2545 Series Service Manual page 87

2
Technology > Pickup Feed System > Controls > Cassette Pickup Assembly
Width detection
Width Length 1 2
B5 257.0 182.0 0 ON
EXEC 267.0 184.0 0 ON
16K 270.0 195.0
0 ON
A5-R 148.5 210.0 ON 0
A4 297.0 210.0 0 ON
STMT-R 139.7 215.9 ON 0
LTR 279.4 215.9 0 ON
B5-R 182.0 257.0 ON 0
LTR-R 215.9 279.4 0 0
A4-R 210.0 297.0 0 0
LGL 215.9 355.6 0 0
B4 257.0 364.0 0 ON
8K 270.0 390.0 0 ON
A3 297.0 420.0 0 ON
LDR 279.4 431.8 0 ON
Also, the cassette presence is detected when the size switch is pushed. (If no switch is
pushed, it is determined as no cassette.)
2 Technology > Pickup Feed System > Controls > Cassette Pickup Assembly
Length detection
3 4 1 2 3
ON 0 0 0 0
ON 0 0 0 0
ON 0 ON 0 0
ON 0 ON ON 0
0 0 ON ON 0
ON 0 ON ON 0
ON 0 ON ON 0
ON 0 0 ON ON ON
ON 0 ON 0 0 ON
ON 0 0 ON ON
ON 0 ON ON 0 ON
ON 0 ON ON ON
ON 0 ON ON ON ON
0 0 0 0 ON ON
ON 0 0 0 ON ON
T-2-36
Setting method when the size detection patterns are overlapped
4 ASize should be found manually on the check screen for the combination of A5-Rand
0
STMT-R or the combination of B5-R and EXEC.
0
Specify the ecognition method for the special paper with user setting.
0
The setting size is indicated below.
0
0
Related Service Mode
0
PRINT> CST> CASX> CSTX-UY> Number
0
X shows Cassette Number. Y shows size category. (X, Y is one of the number 1/2/3/4.)
0
U-size.
U1 26: OFI, 27: E-OFI, 37: M-OFI, 36: A-OFI, 24: FLSP, 25: A-FLSP, 30: A-LTRR, 42:
0
FA4, 34: G-LGL 0: default
U2 32: G-LTR-R, 34: G-LGL, 23: K-LGL-R, 0: default
U3 22: K-LGL, 31: G-LTR, 29: A-LTR, 0: default
U4 28: B-OFI, 0: default
2-61
Size
T-2-37
2-61