Print; Numerin Parameter Settings (Numeric Prama.) - Canon imageRUNNER 2545 Series Service Manual

● (#SCAN> FEEDER> FUNCTION>CL-CHK)
Checking the DF clutch
DSpecify a clutch to perform a clutch check. Select #SCAN>FEEDER > FUNCTION > CL-ON
to execute this.
● (#SCAN> FEEDER> FUNCTION> CL-ON)
Starting the clutch operation
Selecting 1 starts clutch operation.
● (#SCAN> FEEDER> FUNCTION> FAN-CHK)
Checking the ADF cooling fan
Specify a fan to perform a fan check. Select #SCAN> FEEDER> FUNCTION> FAN-ON to
execute this.
● (#SCAN> FEEDER> FUNCTION> FAN-ON)
Starting the fan operation
Selecting 1 starts fan operation.
● (#SCAN> FEEDER> FUNCTION> SL-CHK)
Checking the ADF solenoid
Specify a solenoid to perform a solenoid check. Select #SCAN>FEEDER > FUNCTION > SL-
ON to execute this.
0: Pressure solenoid (SL1)
1: Stamp solenoid (SL2)
● (#SCAN> FEEDER> FUNCTION> MTR-ON)
Starting the motor operation
Selecting 1 starts motor operation.
● (#SCAN> FEEDER> FUNCTION> ROLL-ON)
ADF roller cleaning mode
Rotate the roller with the motor and attach a lint-free paper moistened with alcohol to the
roller to clean it.
● (#SCAN> FEEDER> FUNCTION> FEED-ON)
Checking the passage of paper with ADF
Selecting 1 starts checking passage of paper by the ADF.
8
8

#PRINT

■ Numerin Parameter Settings (Numeric Prama.)

Item No. Default Setting range
#PRINT SW01- SW13
SW14: 00000100
NUMERIC
SW15: -
SW17
SW18: 00000100
SW19: - 50
#PRINT 01: - 30
34: 100 -128 to 127, one
NUMERIC
unit = 0.1 mm
35: 100 -128 to 127, one
unit = 0.1 mm
36: 100 -128 to 127, one
unit = 0.1 mm
37: 100 -128 to 127, one
unit = 0.1 mm
38: 100 -128 to 127, one
unit = 0.1 mm
39: - 52:
53: 25 0 to 9999, one
unit = 0.1 mm
54: 25 0 to 9999, one
unit = 0.1 mm
55: 25 0 to 9999, one
unit = 0.1 mm
56: 25 0 to 9999, one
unit = 0.1 mm
57:
58: 145 -128 to 127, one
unit = 0.1 mm
59: 163 -128 to 127, one
unit = 0.1 mm
60:
61: 145 -128 to 127, one
unit = 0.1 mm
62: 7 0 to 14
63: 7 0 to 14
64: 2 0 to 4
65: 0 0 to 2
66: 0 0 to 3
67:- 135:
136: 1000 -512 to 512
137:- 139:
8-31
Function
Not used
Special mode setting
Not used
Special mode setting
Not used
Not used
Left-end registration adjustment (manual
feed tray)
Left-end registration adjustment (cassette 1)
Left-end registration adjustment (cassette 2)
Left-end registration adjustment (cassette 3)
Left-end registration adjustment (cassette 4)
Not used
Adjustment of margin at leading edge of
copy
Adjustment of margin at trailing edge of
copy
Adjustment of margin at right edge of copy
Adjustment of margin at left edge of copy
Not used
Adjustment of the registration loop volume
(Manual tray)
Adjustment of the registration loop volume
(Cassette)
Not used
Adjustment of the registration loop volume
(Duplex unit)
Temperature adjustment UP/DOWN mode
(For normal paper)
Temperature adjustment UP/DOWN mode.
(For thick paper)
Mode for preventing the end temperature
rise
Mode for reducing sand image
Temperature/ Humidity sensor fixed mode
Not used
Adjustment of the point to start writing in
main scanning direction (A)
Not used
8-31