2
Technology > Controller System > Service Operations > Service precautions
● Heater operating condition
Turning on the
Standby mode
environment heater switch
Printing
Turning off the main
power switch
Sleep mode
2
Technology > Controller System > Service Operations > Service precautions
Cassette
Reader
Drum
heater
heater
heater
ON
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
ON
ON
T-2-14
Service Operations
■ Action to take when replacing parts
Part name
Secondary battery
The secondary battery is powered even after the
main power switch is turned off.
SO-DIMM
1) Press the SW3 on the main controller.
2) The LED10 on the main controller goes out.
3) Now, you can replace parts.
Main controller PCB
Print the set/loaded data.
Install the parts (removed from the old PCB) on the
new PCB. Set/load data again.
■ Consumables
None.
■ Service precautions
None.
Action
Reference
(p.
4-47.)
(p.
4-43.)
2-27
T-2-15
2-27