Electrical System Maintenance; Electrical System Safety; Disconnecting The Battery - Toro Reelmaster 5610-D Owner's Manual

Figure 130
1. Fuel-sender cover
2. Phillips-head screw
g373885
3. Fuel tank

Electrical System Maintenance

Electrical System Safety

•
Disconnect the battery before repairing the machine.
Disconnect the negative terminal first and the positive
last. Connect the positive terminal first and the negative
last.
•
Charge the battery in an open, well-ventilated area,
away from sparks and flames. Unplug the charger
before connecting or disconnecting the battery. Wear
protective clothing and use insulated tools.

Disconnecting the Battery

DANGER
Battery electrolyte contains sulfuric acid, which is fatal
if consumed and causes severe burns.
•
Do not drink electrolyte and avoid contact with skin,
eyes, or clothing. Wear safety glasses to shield
your eyes and rubber gloves to protect your hands.
•
Fill the battery where clean water is always available
for flushing the skin.
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Open the screen; refer to
52).
3. Press the sides of the battery cover, and remove the
cover from the battery tray
1. Tab (battery cover)
2. Negative battery cable
4. Disconnect the negative battery cable.
5. Slide the insulator cover off the positive battery-cable
clamp, and disconnect the positive battery cable.
63
52).
Opening the Screen (page
(Figure 131).
Figure 131
3. Insulator cover (positive
battery cable)
4. Slot (battery tray)
g378176