Replacing The Telematic Fuse - Toro Reelmaster 5610-D Owner's Manual

Figure 134
1. Fuse block
4. Assemble the control-arm cover to the control arm,
and secure the cover with the 2 latches.

Replacing the Telematic Fuse

1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Unlatch and tilt seat; refer to
53).
3. Remove the cap from the in-line fuse holder labeled
10 A F T
USE ELEMATIC
2. Fuse decal (inside the
control-arm cover)
52).
Tilting the Seat (page
P (Figure 135).
WR
1. Cap
2. Fuse
4. Remove the fuse from the fuse holder.
5. Insert a fuse of the same type and amperage.
g375761
6. Assemble the cap onto the in-line fuse holder.
7. Lower and latch the seat; refer to
(page 53).
65
Figure 135
3. Fuse holder (labeled 10 A
F T
USE ELEMATIC
Tilting the Seat
g378242
P )
WR