Toro Reelmaster 5610-D Owner's Manual page 61

Figure 122
1. Fuel-sender cover
2. Phillips-head screw
3. Remove the 2-socket connector of the fuel-sender
harness from the 2-pin connector of the machine wire
harness (Figure 123).
Figure 123
1. 2-pin connector (machine
wire harness)
4. Move the clamps that secure the hoses to the fittings
of the fuel sender inboard, and remove the hoses
from the fittings (Figure
3. Fuel tank
2. 2-socket connector (fuel
sender)
124).
1. Hoses
2. Clamp
g373885
5. Loosen the fuel-sender cap
g373884
1. Cap (fuel sender)
6. Carefully lift the fuel sender from the tank.
Note:
Do not bend the pick-up tube, return tube,
or float arm.
61
Figure 124
3. Fitting (fuel sender)
(Figure 125).
Figure 125
g373882
g373883