Toro Reelmaster 5610-D Owner's Manual page 24

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine, such as the operating status, various diagnostics,
and other information about the machine
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button— Press this
button to access the InfoCenter menus. You can use it
to back out of any menu you are currently using.
•
Middle Button— Press this button to scroll down menus.
•
Right Button— Press this button to open a menu where
a right arrow indicates additional content.
Note:
The purpose of each button may change depending
on what is required at the time. Each button is labeled with
an icon displaying its current function.
(Figure
Figure 46
3. Middle button
4. Left button
InfoCenter Icon Description
46). There
SERVICE DUE
g020650
24
Hours remaining until service
Reset the service hours
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine speed (rpm)
Hour meter
Info icon
Fast
Slow
Fuel level
Stationary regeneration is required.
The glow plugs are active.
Raise the cutting units.
Lower the cutting units.
Sit in the seat.
Parking brake is On.
The range is high (transport).
Neutral
The range is low (mow).
Engine-coolant temperature (°C or
°F)
Temperature (hot)
The PTO is engaged.
Not allowed