Toro Reelmaster 5610-D Owner's Manual page 44

6. Engage the parking brake.
7. Set the throttle to the low I
Performing a Parked or Recovery Regeneration
CAUTION
The exhaust temperature is hot (approximately 600°C
(1,112°F) during DPF regeneration. Hot exhaust gas
can harm you or other people.
•
Never operate the engine in an enclosed area.
•
Make sure that there are no flammable materials
around the exhaust system.
•
Never touch a hot exhaust system component.
•
Never stand near or around the exhaust pipe of the
machine.
Important:
The computer of the machine cancels
DPF regeneration if you increase the engine speed
from low idle or release the parking brake.
1. Access the DPF Regeneration menu, press the center
button to scroll down to either the P
S option or the R
TART
(Figure 83), and press the right button to select the
start the regeneration
Figure 83
2. At the V
ERIFY FUEL LEVEL
1/4 tank of fuel if you are performing the parked
regeneration or 1/2 tank of fuel if you are performing
the recovery regeneration, and press the right button
to continue (Figure
position.
DLE
R
ARKED
R S
ECOVERY EGEN TART
(Figure 83).
screen, verify that you have
84).
EGEN
option
3. At the DPF checklist screen, verify that the parking
brake is engaged and that the engine speed is set to
low idle
g224402
g224629
4. At the I
button to continue
44
Figure 84
(Figure 85).
Figure 85
DPF R screen, press the right
NITIATE EGEN
(Figure 86).
g224414
g227678
g224407
g227679