Toro Reelmaster 5610-D Owner's Manual page 14

Figure 14
1. Carriage bolt (3/8 x 1-1/4
inches)
2. Turf-compensator bracket
3. Align the studs of the right hose guide with the holes
in the cutting-unit frame and the turf-compensator
bracket (Figure 15).
Note:
Ensure that the support loop of the hose
guide aligns toward the centerline of the machine.
Figure 15
1. Stud (hose guide )
2. Turf-compensator bracket
4. Assemble the hose guide and turf-compensator
bracket to the cutting-unit frame with the 2 flange
locknuts (3/8 inch).
5. Torque the locknuts to 37 to 45 N∙m (27 to 33 ft-lb).
g375690
3. Flange locknut (3/8 inch)
g375688
3. Flange locknut (3/8 inch)
4. Inboard
Positioning the Turf Compensating Spring
Cutting Unit 2
1. Cutting unit 1
2. Cutting unit 2
3. Cutting unit 3
4. Cutting unit 4
1. If the hairpin is installed in the rear hole of the
compensation-spring rod—remove the hairpin and
insert it in the hole next to the bracket
1. Hairpin
2. Remove the 2 flange locknuts (3/8 inch) and 2
carriage bolts (3/8 x 1-1/4 inches) that secure the
turf-compensator bracket to the cutting-unit frame
(Figure 18).
14
Figure 16
5. Cutting unit 5
6. Reel motor
7. Weight
(Figure
Figure 17
g379514
17).
g375689