Electrical System Maintenance; Electrical System Safety; Locating The Fuses - Toro Groundsmaster 5910 Operator's Manual

Figure 64
1. Fuel filter
2. Banjo fitting
6. Operate the water-separator priming pump until a solid
stream of fuel is detected at the banjo fitting
64).
7. Tighten the fuel-filter banjo fitting.
8. Push down the priming pump and turn it clockwise
to secure.
9. Start the engine and check for fuel leaks around the
filter head.
3. Water Separator
4. Priming pump
(Figure
Electrical System
Maintenance

Electrical System Safety

•
Disconnect the battery before repairing the machine.
Disconnect the negative terminal first and the positive
last. Connect the positive terminal first and the negative
last.
•
Battery acid is poisonous and can cause burns. Avoid
contact with your skin, eyes, and clothing. Protect your
face, eyes, and clothing when working with a battery.
•
Battery gases can explode. Keep cigarettes, sparks, and
flames away from the battery.
•
Charge the batteries in an open, well-ventilated area,
away from sparks and flames. Unplug the charger before
connecting or disconnecting the battery. Wear protective
clothing and use insulated tools.
•
Do not use a pressure washer near any electronic
components.
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.

Locating the Fuses

The traction-unit fuses
power-center console (Figure
47
WARNING
(Figure 67) are located in the
66).
g021 155
Figure 65