Table of Contents
Advertisement
IDE Control
IDE Auto-detect
There are cases wherein the HDD parameters that you entered and
those detected by the auto-detection function are mismatched. This
causes the system not to boot. If this happens, we recommend that
you set this parameter to
function. The default setting is
Block Mode
This function enhances disk performance depending on the hard disk
in use. This parameter is normally set to
data transfer in block (multiple sectors) by increasing the data
transfer rate. The other selections for this parameter are 2 S/B, 4
S/B, 8 S/B, 16 S/B, 32 S/B, 64 S/B and Disabled.
parameter if your hard disk does not support this feature.
Onboard IDE Present
The settings for this function are Auto, Enabled and Disabled. Select
Enabled
if you have an onboard PCI IDE.
automatically detect the presence of PCI IDE. Select
disregard the PCI IDE function.
PIO Mode
This parameter lets you set the PIO mode that your onboard PCI IDE
supports. The selections are from Mode 0 to Mode 4, Auto and
Disabled.
Set this parameter either by entering the PIO mode
manually or selecting
PIO mode. Disable the parameter to bypass the feature.
User's Guide
Disabled
to bypass the auto-detection
.
Enabled
Auto
to automatically detect the supported
Auto
AMI BIOS
. This setting allows
Disable the
Select
Auto
to
to
Disabled
3-11
Advertisement
Table of Contents
