Secondary Drives Present; Chipset Setup Mode - AOpen AP5C User Manual

AMI BIOS
Secondary 2nd LBA Mode
This enhanced IDE feature allows you to use a hard disk with a
capacity higher than 528 MB. This is made possible through the
Logical Block Address (LBA) mode translation. This parameter
affects the secondary IDE hard disk drive connected to the IDE 2
connector. The default setting is Disabled
.

Secondary Drives Present

This parameter lets you install up to two IDE hard disks in the
secondary channel. Select None if you do not have any.

Chipset Setup Mode

This function allows you to change the Chipset Setup DRAM control
parameters according to the end-user type. The available settings
are End-user and Engineer. We recommend that you select
End-
user . See the following section for more details on Chipset
Features Setup.
User's Guide 3-13