Break Switch; Keyboard Connector - AOpen AP5C User Manual

Hardware Setup

Break Switch

The break switch is originally the turbo switch. It gives the user the
option to directly enter the system suspend mode by setting the
switch to the on position. To set, simply press the switch. Make sure
that the break switch is at the off position before you set it to the on
position. To set it to the off position, simply press the switch to
release it from the on position.

Keyboard Connector

The keyboard connector is a 5-pin, AT-compatible connector. The
following figure shows how to connect a keyboard.
The PS/2 keyboard connector is optional.
2-18 User's Guide