Table of Contents
Advertisement
AMI BIOS
Floppy Drive Swapping
This parameter allows you to swap floppy drives. For example, if you
have two floppy drives (A and B), you can assign the first drive as
drive B and the second drive as drive A or vice-versa. Disable the
parameter to bypass the function. The default is
Disabled.
System Boot-up Sequence
The settings are C:, A: and A:, C: to specify the system search
sequence. The default setting is
A:,C:.
Password Checking
The settings are Setup and Always. The Setup setting allows the
system to boot and use the password only to protect the Setup Utility
Configuration settings from being tampered with. The Always setting
requires you to enter the password everytime you boot the system.
The default setting is
Setup
.
Cache Memory
The available selections for this parameter are Internal, Both and
Disabled. Select
Internal
if you want to enable the internal cache
memory.
Select
if you want to use both the internal and
Both
external cache memories.
Select
Disabled
to disregard the
internal and external cache features.
User's Guide
3-9
Advertisement
Table of Contents
