Table of Contents
Advertisement
AMI BIOS
IDE Drive Power Down in
This option allows you to set the mode when to "spin down" your IDE
hard disk. The disk returns to full speed once the system resumes to
normal mode. The settings are Standby, Suspend and Disabled.
Video Power Down in
This option allows you to set the mode when to power down your
video monitor.
The video monitor returns to full power once the
system resumes to normal mode.
The settings are Standby,
Suspend and Disabled.
VGA Power Down Mode
This option lets you choose the VGA power down mode.
The
settings are Standby, Suspend and Off.
Slow Clock Ratio
When the system enters the standby mode, the CPU clock starts to
slow down. This parameter lets you set the "slow-down" clock ratio.
The settings are 1:2, 1:4, 1:8, 1:16, 1:32, 1:64, and 1:128.
Break Event (IRQ 3~7, 9~15)
Enabling these parameters allow your system to monitor the IRQ
activities. Any activity detected resets the power-management timers
and resumes the system to normal mode.
3-24
User's Guide
Advertisement
Table of Contents
