Table of Contents
Advertisement
Installation
The full baby-AT size of the AP5C system board easily fits most
housings. It has mounting holes that conform to the standard system
housing.
Some housings may differ slightly in design, requiring additional steps
to install the board. Read the documentation that comes with the
housing.
Make sure that you have already installed
the system board components like the
CPU and memory, and have set the
appropriate jumpers before you proceed.
Installing the System Board
1.
Open the system housing.
2.
Use at least two screws that come with the housing to secure the
board.
3.
Attach the power supply cables to the power connector and the
front panel connectors to the multifunction connector. See the
section Connectors.
4.
Install any additional components that you have not yet installed.
User's Guide
Hardware Setup
2-21
Advertisement
Table of Contents
