Enabling The Onboard Super I/O Controller; Selecting The Ecp Dma Channel - AOpen AP5C User Manual

Enabling the Onboard Super I/O Controller

The onboard super I/O controller is SMC37C665GT. If you want to
enable or disable the onboard I/O controller then you must reset the
3-pin jumper marked JP5 on the system board.

Selecting the ECP DMA Channel

The 3-pin jumpers JP3 and JP4 let you select the DMA channel for
ECP function. The available channels are DMA 3 and DMA 1.
DMA 3
DMA 1
User's Guide
Hardware Setup
JP5
Enabled
Disabled
JP3 JP4
2-11