AOpen AX4GE Easy Installation Manual
AOpen AX4GE Easy Installation Manual

AOpen AX4GE Easy Installation Manual

Motherboard
Hide thumbs Also See for AX4GE:

Advertisement

Quick Links

Front Audio Connector
MODEM-CN Connector
AC'97 CODEC
S/PDIF Connector
CD-IN Connector
CNR Connector
32-bit PCI Expansion Slot x6
WOL Connector
COM2 Connector
Dr. LED Connector
SYSFAN3 Connector
IrDA Connector
JP28 Keyboard/Mouse Wakeup Jumper
Case Open Connector
USB2.0 Connector
JP14 CMOS Clear Jumper
Front Panel Connector
4Mb Flash ROM BIOS
ATA 66/100 IDE Connector x2
(AOpen reserves the right to revise all the specifications and information contained in this document which is
subject to change without notice.)
PS/2 Mouse
SPP/EPP/ECP Parallel Port
Connector
PS/2 Keyboard
COM 1 Port
VGA Port
Connector
LAN Port
MIDI/Game Port
(AX4GE-N Only)
USB2.0 Port
MIC-In
Line-In
Speaker Out
Resetable Fuse
4-pin 12V. ATX Power Connector
Low ESR Capacitors
SYSFAN2 Connector
AGP 4x Expansion Slot
478-pin CPU socket (Willamette/Northwood)
with Voltage and Frequency Auto-detection
®
®
that supports Intel
Pentium
4 1.4~2.8GHz+
CPU
Intel 845GE Chipset
CPUFAN1 Connector
184-pin DIMMx3 supports DDR200/266/333
SDRAM maximum up to 2GB (Please note
only DDR333 can only run at FSB 533MHz)
ATX Power Connector
FDD Connector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AX4GE and is the answer not in the manual?

Questions and answers

Summary of Contents for AOpen AX4GE

  • Page 1 JP14 CMOS Clear Jumper Front Panel Connector ATX Power Connector 4Mb Flash ROM BIOS FDD Connector ATA 66/100 IDE Connector x2 (AOpen reserves the right to revise all the specifications and information contained in this document which is subject to change without notice.)
  • Page 2: Connecting Atx Power Connector

    1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this 3.
  • Page 3: Installing Processor

    3. Installing Processor 5. Setting CPU Voltage & Frequency Setting CPU Core Voltage This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package This motherboard supports CPU VID function. The CPU core voltage will be automatically developed by Intel. Other forms of CPU package are impossible to be fitted in. detected.
  • Page 4: Installing Memory Modules

    6. Installing Memory Modules 8. S/PDIF Connector Although Intel claims that 845GE Chipsets only support two DIMM sockets (four banks), we S/PDIF (Sony/Philips Digital Interface) is a latest audio transfer file format that provides impressive overcome this obstacle with special circuit design in order to provide better adaptability for quality through optical fiber and allows you to enjoy digital audio instead of analog.
  • Page 5: Case Open Connector

    12. Case Open Connector 10. JP28 Keyboard/Mouse Wakeup Jumper The “CASE OPEN” header provides chassis intrusion-monitoring function. To make this This motherboard provides PS2 keyboard / mouse wake-up function. You can use JP28 to function works, you have to enable it in the system BIOS, connect this header to a sensor enable or disable this function, which could resume your system from suspend mode with somewhere on the chassis.
  • Page 6: Bios Upgrade

    16. Power-on and Load BIOS Setup 14. Support 10/100 Mbps LAN Onboard (AX4GE-N Only) After you finish jumper settings and connect correct cables, power on and On the strength of Intel ICH4 on board, it provides 10/100M bps Ethernet for office and enter the BIOS Setup.
  • Page 7: Part Number And Serial Number

    IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. AX4GE-N is model name of motherboard; R1.02 is BIOS version...
  • Page 8 Online Manual: To download manual, please log on and then select your preferred language. Under “Type” directory, choose “Manuals” to go to our manual database. You can also find the manual and EIG in AOpen Bonus Pack. http://club.aopen.com.tw/downloads Dear Customer, Thanks for choosing AOpen products.

This manual is also suitable for:

Ax4ge-n

Table of Contents