Hardware Setup
Installing a SIMM
Observe
installing components.
Follow these steps to install a SIMM:
1.
Slip a SIMM at a 45
side facing down. Always install SIMMs beginning with Bank 0.
Be careful when inserting or removing
SIMMs. Forcing a SIMM in or out of a
socket can damage the socket or the
SIMM (or both).
2.
Gently push the SIMM up until the pegs of the socket slip into
the holes on the SIMM and the holding clips lock the SIMM into a
vertical position.
The SIMM should be at a 90
installed.
2-14
the
ESD
precautions
o
angle into a socket with the component
o
when
angle when
User's Guide
Need help?
Do you have a question about the AP5C and is the answer not in the manual?