AXIOMTEK OPS520 Series User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Computer Hardware
  5. OPS520 Series
  6. User manual

AXIOMTEK OPS520 Series User Manual

Intel open pluggable specification box
Hide thumbs Also See for OPS520 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPS520 Series
Intel Open Pluggable Specification Box
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPS520 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK OPS520 Series

Summary of Contents for AXIOMTEK OPS520 Series

  • Page 1 OPS520 Series Intel Open Pluggable Specification Box User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.

  • Page 3: Safety Approvals

    Safety Approvals ◼ CE Marking ◼ FCC Class A ◆ FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are mean to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Safety Precautions

    10. Please wear a wrist-grounding strap if you handling boards and eletronic components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. and Atom™ are registered trademarks of Intel Corporation.

  • Page 5: Table Of Contents

    Table of Contents Disclaimers ......................ii Safety Approvals ....................iii Safety Precautions ....................iv SECTION 1 INTRODUCTION................. 1 General Description ................1 System Specifications ............... 2 1.2.1 Main CPU Board ....................2 1.2.2 I/O System ......................2 Mechanical Assembly ................ 4 1.3.1 Dimensions .......................
  • Page 6 3.1.2 CPU FAN Connector (CN3) ................24 3.1.3 M.2 2230 Key E Wi-Fi & Bluetooth (CN3) ............. 24 3.1.4 USB 2.0 Port (CN4) ..................25 3.1.5 USB 3.1 / USB 2.0 Stack Port (CN5) ............. 25 3.1.6 DisplayPort Connector (CN6) ............... 26 3.1.7 USB3.1 Type-C Port (CN7) ................

  • Page 7: Section 1 Introduction

    Easy maintenance OPS520 Series offers a best solution for digital signage market. Compliant with Intel OPS architecture, digital signage players are capable of deploying interchangeable systems faster and easing upgrading/maintenance, while lowering costs for development and implementation.

  • Page 8: System Specifications

    OPS520 User’s Manual System Specifications 1.2.1 Main CPU Board ⚫ Core™ i7/i5/i3/Celeron Processors, LGA1200, 35W TDP ◼ ® Gen. Intel ⚫ System Chipset ® ◼ Intel Q570/H510 PCH ⚫ BIOS ◼ American Megatrends Inc. UEFI (Unified Extensible Firmware Interface) . ⚫...
  • Page 9 OPS520 User’s Manual ⚫ Storage ◼ One M.2 Key M 2280 for NvME SSD ⚫ Antenna opening ◼ Two Antenna openings in the front I/O side ⚫ Net Weight ◼ 0.9kg (1.99 lb) without cooler ⚫ Dimension (Main Body Size) ◼...

  • Page 10: Mechanical Assembly

    30mm, and it shows the location of the screw holes of front panel as well as the security lock. ※ While plugging the OPS module, please make sure the heat sink side of OPS module toward the outside. Axiomtek will be out of reasonability if there is any damage occurred due to it.

  • Page 11: I/O Outlet

    OPS520 User’s Manual 1.3.2 I/O outlet The following figures show you the locations of the OPS520 Series I/O outlets. 1.3.3 Mechanical Specifications OPS520 Series is docked in the reference display panel The OPS520 Pluggable Module docked at a display panel system.
  • Page 12 OPS520 User’s Manual Exploded View of the Pluggable Module Introduction...
  • Page 13 The Guide Rail Mechanism for the OPS520 Series Module You can use the rails alongside of OPS520 Series Module to dock and undock the plug connector at the back of the module to connect with docking board. There are two lock pins on each side of the rail, and they serve as the locking mechanism to attach the lock holes on the series module.
  • Page 14 OPS520 User’s Manual Location of Lock Hole on the Pluggable Module *The drawing is base on Intel Open Pluggable Specification Introduction...
  • Page 15 OPS520 User’s Manual Dimensions of the Guide Rail Introduction...
  • Page 16 Vent Holes at the Pluggable Module Back Panel On the OPS520 Series module, it is recommended by Intel that some vent holes be opened at the back so that hot air can escape more easily from the module that the FAR in on both sides of the module back panel should be greater than 0.25.

  • Page 17: Reference Design

    Reference Design Display Panel Rear View – Internal The digital signage OPS520 Series prototype is based on a 32” display panel with the functional blocks illustrated. It is mainly a 3 -board partitioning design consisting of the pluggable module, docking board and the pane l control board.

  • Page 18: Package List

    ⚫ OPS500-520-H x 1 ⚫ Quick Manual x 1 ⚫ Thermal Grease (Syringe 1G) x 1 ⚫ M.2 Thermal Pad x 1 If you cannot find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...

  • Page 19: Section 2 Hardware Installation

    ◼ Pluggable Module Method DRAM, Storage, Wireless module Installations The OPS520 Series model offers a convenient drive bay module for users to DDR4 SO-DIMM DRAM, M.2 2280 Key M SSD Storage and wireless modules. Please follow the steps as below: 2.1.1...

  • Page 20: Ddr4 So-Dimm Dram Installation (So-Dimm 2)

    OPS520 User’s Manual Step 3 Place the memory module into the socket and press it firmly. The socket latches are levered upwards and clipped on to the edges of the SO-DIMM. 2.1.2 DDR4 SO-DIMM DRAM Installation (SO-DIMM 2) Step 1 Locate screws at the chassis as red marked and loosen four screws.
  • Page 21 OPS520 User’s Manual Step 3 Place the memory module into the socket and press it firmly. The socket latches are levered upwards and clipped on to the edges of the SO-DIMM. Hardware Installation...

  • Page 22: 2.1.3 M.2 Ssd Installation

    OPS520 User’s Manual 2.1.3 M.2 SSD Installation The OPS520 Series provides one M.2 Key M 2280 socket to install M.2 SSD. Please refer to the following instructions and illustration. Step 1 Turn the system upside down to locate screws at the chassis as red marked and loosen five screws.

  • Page 23: Wireless Module (M.2 Key E Card)

    OPS520 User’s Manual 2.1.4 Wireless Module (M.2 Key E Card) The OPS520 Series provides one M.2 Key E Socket for user to install M.2 Key E Card, please refer to the following instructions and illustration. Step 1 Locate screws at the chassis as red marked and loosen four screws.
  • Page 24 OPS520 User’s Manual Step 3 Locate the M.2 2230 Key E slot on the board. And holding the M.2 2230 Key E card at a 30 degree angle up from horizontal, slowly insert the golden fingers into the M.2 2230 Key E slot until it is fully inserted in. Step 4 Then secure the M.2 2230 Key E Wi-Fi Module to the carrier by tightening up the one M3*4L pan head screw to the marked position.

  • Page 25: Pluggble Module Method

    Step 1 Pluggable the box into display Caution: When plugging OPS520 Series module into an OPS display, make sure the module’s heat sink is facing outside of the display. Axiomtek is not responsible for any damage caused by wrong installation Step 2 Fasten the screws as illustrated.
  • Page 26 OPS520 User’s Manual This page is intentionally left blank. Hardware Installation...

  • Page 27: Section 3 Connectors

    OPS520 User’s Manual SECTION 3 CONNECTORS This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Connectors Connectors connect this board with other parts of the system. Loose or improper connection might cause problems.
  • Page 28 OPS520 User’s Manual Board Layout Top side Bottom side Connectors...

  • Page 29: Jae Tx25A Connector (Cn1)

    OPS520 User’s Manual 3.1.1 JAE TX25A Connector (CN1) Connector JAE TX25A CN1 is for JAE improced interface supported. Pin Signal Pin Signal Pin Signal Pin Signal DDP_3N DDP_3P 3 GND 4 DDP_2N DDP_2P 7 DDP_1N 8 DDP_1P 10 DDP_0N 11 DDP_0P 12 GND 13 DDP_AUXN 14 DDP_AUXP...

  • Page 30: Cpu Fan Connector (Cn3)

    OPS520 User’s Manual 3.1.2 CPU FAN Connector (CN3) CN3 provides power input and FAN control signal, and you can connect CPU FAN through this connector. Signal FAN CTRL FAN DET 3.1.3 M.2 2230 Key E Wi-Fi & Bluetooth (CN3) CN4 for PCI-Express and USB signals interface supported Socket 1，Key E，type 2230. Signal Signal Signal...

  • Page 31: Usb 2.0 Port (Cn4)

    OPS520 User’s Manual 3.1.4 USB 2.0 Port (CN4) The Universal Serial Bus connectors are compliant with USB 2.0, and ideally for installing USB peripherals such as keyboard, mouse, scanner, etc. Signal USB_POWER USB D0- USB D0+ 3.1.5 USB 3.1 / USB 2.0 Stack Port (CN5) The Universal Serial Bus connectors are compliant with USB 3.1 and USB 2.0, and ideally for installing USB peripherals such as keyboard, mouse, scanner, etc.

  • Page 32: Displayport Connector (Cn6)

    OPS520 User’s Manual 3.1.6 DisplayPort Connector (CN6) The DP is a digital display interface which is capable of transmitting high-definition video and high-resolution audio. Signal Signal DP_DATA0+ DP_DATA0- DP_DATA1+ DP_DATA1- DP_DATA2+ DP_DATA2- DP_DATA3+ DP_DATA3- DP_AUX+ DP_AUX- DP_HPD +3.3V 3.1.7 USB3.1 Type-C Port (CN7) The Universal Serial Bus (compliant with USB 3.1) type C connectors for installing USB peripherals such as keyboard, mouse, scanner, etc.

  • Page 33: Audio Combo Jack (Cn8)

    OPS520 User’s Manual 3.1.8 Audio Combo Jack (CN8) The system provides one HD audio 4-poles jack headset connector. Signal SLEEVE LINE_L RING LINE_R HPOUT_JD 3.1.9 HDMI Connector (CN9) The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable of transmitting high-definition video and high-resolution audio over a single cable.

  • Page 34: Power & Reset Button (Cn10)

    OPS520 User’s Manual 3.1.10 Power & Reset Button (CN10) The CN10 comes with one power button and one reset button. The reset button is for rebooting your computer instead of turning OFF the power switch. It is a better way to reboot your system for a longer life of the system’s power supply.

  • Page 35: 2280 Key M Ssd (Scn1)

    OPS520 User’s Manual 3.1.12 M.2 2280 Key M SSD (SCN1) The OPS520 comes with one M.2 2280 Key M NvME SSD for storage. Signal Signal Signal Signal +3.3V +3.3V LED_1# +3.3V +3.3V +3.3V +3.3V SATA-B+ SATA-B- SATA-A- SATA-A+ CONNECTOR CONNECTOR Key M Key M CONNECTOR...
  • Page 36 OPS520 User’s Manual Power LED The Power LED lights up when the system is powered ON Storage Activity LED This connection is linked to hard drive activity LED on the control panel. LED flashes when Storage is being accessed. Connectors...

  • Page 37: Section 4 Ami Bios Setup Utility

    OPS520 User’s Manual SECTION 4 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Starting To enter the setup screens, follow the steps below: ➢ Turn on the computer and press the <Del>...

  • Page 38: Main Menu

    OPS520 User’s Manual Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below. ⚫...

  • Page 39: Advanced Menu

    OPS520 User’s Manual Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: ➢...
  • Page 40 OPS520 User’s Manual ⚫ NCT5525D Super IO Configuration Set parameters of Serial Port ➢ Serial Port Enable or Disable serial port. ➢ Device Settings Display the serial port resource. AMI BIOS Setup Utility...
  • Page 41 OPS520 User’s Manual ⚫ Hardware Monitor This screen shows the Hardware Configuration and enable or disable smart fan. ➢ Smart Fan Function Enable or Disable Smart Fan. AMI BIOS Setup Utility...
  • Page 42 OPS520 User’s Manual ⚫ Trusted Computing This screen provides function for specifying the TPM(Trusted Platform Module) settings. ➢ Security Device Support Use this item to enable or disable TPM(Trusted Platform Module) function. AMI BIOS Setup Utility...
  • Page 43 OPS520 User’s Manual ⚫ CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option. ➢ Hyper Threading select Hyper-threading function which Intel's proprietary simultaneous multithreading (SMT) implementation used to improve parallelization of computations (doing multiple tasks at once) performed on x86 microprocessors.
  • Page 44 OPS520 User’s Manual ⚫ Storage Configuration You can use this screen to select options for the Storage Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ➢...
  • Page 45 OPS520 User’s Manual ⚫ USB Configuration You can use this screen to confirm USB settings. AMI BIOS Setup Utility...
  • Page 46 OPS520 User’s Manual ⚫ CSM Configuration Configure settings associated with the CSM (Compatibility Support Module), such as Option ROM execution. AMI BIOS Setup Utility...

  • Page 47: Chipset Menu

    OPS520 User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ➢ PCH LAN Controller Enable or disable PCH LAN controller.

  • Page 48: Boot Menu

    OPS520 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: ⚫ Setup Prompt Timeout ⚫...

  • Page 49: Security Menu

    OPS520 User’s Manual Security Menu The Security menu allows users to change the security settings for the system. ➢ Administrator Password This item indicates whether an administrator password has been set. If the Administrator password is set, BIOS will ask and wait for administrator password entered.

  • Page 50: Save & Exit Menu

    OPS520 User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or failsafe default values. ➢ Save Changes and Exit When you have completed the system configuration changes, select Save Changes and Exit from the Save &...
  • Page 51 OPS520 User’s Manual ➢ Discard Changes and Reset Select this option to quit Setup without making any permanent changes to the system configuration and reboot the computer. Select Discard Changes and Reset from the Save & Exit menu and press <Enter>. Select Yes to discard changes and reset. ➢...
  • Page 52 OPS520 User’s Manual This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 53: Appendix Awatchdog Timer

    OPS520 User’s Manual APPENDIX A WATCHDOG TIMER Watchdog Timer Setting After the system stops working for a while, it can be auto-reset by the Watchdog Timer. The integrated Watchdog Timer can be set up in the system reset mode by program.
  • Page 54 OPS520 User’s Manual This page is intentionally left blank. Watchdog Timer...

Table of Contents