ZyXEL Communications XS1930 Series User Manual page 123

Multi-gigabit smart managed l2 switch
Hide thumbs Also See for XS1930 Series:
Table of Contents

Advertisement

Figure 92 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
The following table describes the fields in the above screen.
Table 54 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
LABEL
DESCRIPTION
Voice VLAN Global Setup
Voice VLAN
Click the second radio button if you want to enable the Voice VLAN feature. Type a
VLAN ID number in the box next to the radio button that is associated with the Voice
VLAN. You also need to create a static VLAN with the same VID in the Static VLAN Setup
screen, and then connect the IP phone with the specified OUI MAC address to a port
that joins the static VLAN
Click the Disable radio button if you do not want to enable the Voice VLAN feature.
Priority
Select the priority level of the Voice VLAN from 0 to 7. Default setting is 5.The higher the
numeric value you assign, the higher the priority for this Voice VLAN.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Clear
Click Clear to reset the fields to default settings.
Voice VLAN OUI Setup
OUI address
Type the IP Phone manufacturer's OUI MAC address. The first three byes is the
manufacturer identifier, the last three bytes is a unique station ID.
OUI mask
Type the mask for the specified IP Phone manufacturer's OUI MAC address to determine
which bits a packet's MAC address should match.
Enter "f" for each bit of the specified MAC address that the traffic's MAC address should
match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any
hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00
and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56
matches this criteria.
Description
Type an description up to 32 characters for the Voice VLAN device. For example:
Siemens.
Chapter 9 VLAN
XS1930 Series User's Guide
123

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xs1930-10-zz0101f

Table of Contents