Hardware Installation And Connection; Installation Scenarios; Desktop Installation Procedure - ZyXEL Communications XS1930 Series User Manual

Hardware Installation and

2.1 Installation Scenarios

This chapter shows you how to install and connect the Switch.
The Switch can be:
• Placed on a desktop.
• Rack-mounted on a standard EIA rack.
Note: Ask an authorized technician to attach the Switch to the rack. See the Installation
Requirements sections in this chapter to know the types of screws and screw drivers for
each mounting method.
WARNING! Failure to use the proper screws may damage the unit.
WARNING! This Switch is not suitable for use in locations where children
are likely to be present.

2.2 Desktop Installation Procedure

Make sure the Switch is clean and dry.
1
Set the Switch on a smooth, level surface strong enough to support the weight of the Switch and the
2
connected cables. Make sure there is a power outlet nearby.
Make sure there is at least 40 mm of clearance from the bottom to the Switch, and make sure there is
3
enough clearance around the Switch to allow air circulation and the attachment of cables and the
power cord. This is especially important for enclosed rack installations.
Remove the adhesive backing from the rubber feet.
4
Attach the rubber feet to each corner on the bottom of the Switch. These rubber feet help protect the
5
Switch from shock or vibration and ensure space between devices when stacking.
XS1930 Series User's Guide
27
C
H A P T E R
Connection
2