Ipv6; Ipv6 Interface Status - ZyXEL Communications XS1930 Series User Manual

Table 34 Basic Setting > Interface Setup (continued)
LABEL
Add
Cancel
Index
Interface Type
Interface ID
Interface
Delete
Cancel

8.10 IPv6

Use this screen to view the IPv6 interface status and configure Switch's management IPv6 addresses.
Click Basic Setting > IPv6 in the navigation panel to display the IPv6 status screen as shown next.
Figure 69 Basic Setting > IPv6
The following table describes the labels in this screen.
Table 35 Basic Setting > IPv6
LABEL
Index
Interface
Active

8.10.1 IPv6 Interface Status

Use this screen to view a specific IPv6 interface status and detailed information. Click an interface index
number in the Basic Setting > IPv6 screen. The following screen opens.
Chapter 8 Basic Setting
DESCRIPTION
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays the type of interface.
This field displays the identification number of the interface.
This field displays the interface's descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the check boxes.
DESCRIPTION
This field displays the index number of an IPv6 interface. Click on an index number to view more
interface details.
This is the name of the IPv6 interface you created.
This field displays whether the IPv6 interface is activated or not.
XS1930 Series User's Guide
98