Access Control; Chapter 36 Access Control; Access Control Overview; What You Can Do - ZyXEL Communications XS1930 Series User Manual

36.1 Access Control Overview

This chapter describes how to control access to the Switch.
FTP is allowed one session. Telnet and SSH share nine sessions. Up to five Web sessions (five different user
names and passwords) and/or limitless SNMP access control sessions are allowed.
Table 150 Access Control Overview
SSH
Share up to nine sessions

36.1.1 What You Can Do

• Use the Access Control screen
• Use the SNMP screen
• Use the Trap Group screen
be sent to each SNMP manager.
• Use the User Information screen
with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens
web configurator at any one time.
• Use the Service Access Control screen
use to access the Switch.
• Use the Remote Management screen
"trusted computers" from which an administrator may use a service to manage the Switch.

36.2 The Access Control Main Screen

Use this screen to display the main screen.
Click Management > Access Control in the navigation panel to display the main screen as shown.
Figure 213 Management > Access Control
Telnet FTP
One session
(Section 36.2 on page
(Section 36.3 on page
(Section 36.3.1 on page
(Section 36.3.3 on page
(Section 36.4 on page
XS1930 Series User's Guide
C
H A P T E R

Access Control

Web
Up to five accounts
293) to display the main screen.
294) to configure your SNMP settings.
295) to specify the types of SNMP traps that should
297) to create SNMP users for authentication
299) to assign which users can access the Switch via
(Section 36.5 on page 300) to decide what services you may
(Section 36.6 on page 301) to specify a group of one or more
293
SNMP
No limit
36