ZyXEL Communications XS1930 Series User Manual page 37

Table 5 LED Descriptions (continued)
LED COLOR
LNK/ACT Blue
1-8 (XS1930-
12HP)
Purple
Sky Blue
Green
Amber
PoE Mode Blue
Green
1-8 (XS1930-
12HP)
Yellow
1G/10G SFP+ Slots
LNK/ACT Green
9-10 (XS1930-10)
Blue
11-12 (XS1930-
12HP)
Chapter 3 Hardware Panels
STATUS DESCRIPTION
On The link to a 10 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 10 Gbps Ethernet network.
On The link to a 5 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 5 Gbps Ethernet network.
On The link to a 2.5 Gbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 2.5 Gbps Ethernet network.
On The link to a 1000 Mbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 1000 Mbps Ethernet network.
On The link to a 100 Mbps Ethernet network is up.
Blinking The Switch is transmitting/receiving to/from a 100 Mbps Ethernet network.
Off The link to an Ethernet network is down.
On Power supplied to all PoE Ethernet ports meets the IEEE 802.3bt standard.
On Power supplied to all PoE Ethernet ports meets the IEEE 802.3at standard.
On Power supplied to all PoE Ethernet ports meets the IEEE 802.3af standard.
Off There is no power supplied.
On The port has a successful 1000 Mbps connection.
Blinking The port is transmitting or receiving data at 1000 Mbps.
On The port has a successful 10 Gbps connection.
Blinking The port is transmitting or receiving data at 10 Gbps.
Off This link is disconnected.
XS1930 Series User's Guide
37