Igmp Snooping - ZyXEL Communications XS1930 Series User Manual

The following table describes the labels in this screen.
Table 91 Advanced Application > Multicast > IPv4 Multicast
LABEL
Index
VID
Port
Multicast Group

24.3.1 IGMP Snooping

Click the IGMP Snooping link in the Advanced Application > Multicast > IPv4 Multicast screen to display
the screen as shown. See
Figure 140 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
The following table describes the labels in this screen.
Table 92 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
LABEL
IGMP Snooping
Active
Chapter 24 Multicast
DESCRIPTION
This is the index number of the entry.
This field displays the multicast VLAN ID.
This field displays the port number that belongs to the multicast group.
This field displays IP multicast group addresses.
Section 24.1 on page 195
DESCRIPTION
Use these settings to configure IGMP snooping.
Select Active to enable IGMP Snooping to forward group multicast traffic only to ports that
are members of that group.
XS1930 Series User's Guide
197
for more information on multicasting.