ZyXEL Communications XS1930 Series User Manual page 166

Chapter 17 Link Aggregation
Figure 119 Trunking Example - Physical Connections
Configure static trunking - Click Advanced Application > Link Aggregation > Link Aggregation Setting. In
2
this screen activate trunk group T1, select the traffic distribution algorithm used by this group and select
the ports that should belong to this group as shown in the figure below. Click Apply when you are done.
Figure 120 Trunking Example - Configuration Screen
Your trunk group 1 (T1) configuration is now complete.
XS1930 Series User's Guide
166