ZyXEL Communications XS1930 Series User Manual page 281

Figure 201 Management > Maintenance
The following table describes the labels in this screen.
Table 145 Management > Maintenance
LABEL DESCRIPTION
Firmware Click Click Here to go to the Firmware Upgrade screen.
Upgrade
Restore Click Click Here to go to the Restore Configuration screen.
Configuration
Backup Click Click Here to go to the Backup Configuration screen.
Configuration
Erase Running- Click Click Here to reset the current configuration of the Switch. Note that this will not reset the
Configuration configuration to the factory default settings.
Save Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Configuration
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Click Custom Default to save the current configuration settings to a custom default file on the
Switch.
Reboot System Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Click Factory Default to reboot the system and load the default configuration settings on the
Switch.
Click Custom Default to reboot the system and load a saved custom default file on the Switch.
This will save the custom default configuration settings to both Configuration 1 and
Configuration 2. If a custom default file was not saved, clicking Custom Default loads the
factory default configuration on the Switch.
Note: Make sure to click the Save button in any screen to save your settings to the
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently operating
on the Switch.
Tech-Support Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds for
log reports and download related log reports for issue analysis. Log reports include CPU history
and utilization, crash and memory.
Certificates Click Click Here to see the Certificates screen and import the Switch's CA-signed certificates.
Chapter 35 Maintenance
current configuration on the Switch.
XS1930 Series User's Guide
281