Table of Contents
Advertisement
CAUTION
When No.2 arm cover is installed, please keep too much load from being applied to
the cables inside the robot, and the air hoses.
If too much load is added, the breaking of a wire and the air hose break, and the robot
cannot operate normally.
CAUTION
When No.2 arm cover is installed, catch neither the cable nor the air hose.
If the bolt is tightened while it had been caught, the breaking of a wire and the air
hose break, and the robot cannot operate normally.
Normal condition
abnormal condition
正常な状態
Air hose
エアホース
折れた状態
2Unpacking to Installation
Spare wiring
2-15
Advertisement
Table of Contents
