PREVOST X3-45 COACH 2018 Operator's Manual page 130

Other Features
5-30
2. Push selection button (3) or (6) until you get
the right day of the week.
3. Push enter button (5) to confirm day.
4. Push selection button (3) or (6) to adjust
hours.
5. Push enter button (5) to confirm hours.
6. Push selection button (3) or (6) to adjust
minutes.
7. Push enter button (5) to confirm minutes:
Display shows AM.
8. Push selection button (3) or (6) to switch
between AM and PM.
9. Push enter button (5) to
confirm and return
standard display.
ADJUST OPERATING TIME
The operating time is the period, when the
preheater is ON through pushing the instant
heating button or after activating a starting
time.
1. Push menu-button (2) to show menu row at
the top of the display (1).
2. Push selection button (3) or (6) until setting
sign (C) is blinking.
3. Push enter button (5) to show the adjusted
operating time.
4. Push selection button (3) or (6) to adjust the
operating time.
5. Push enter button (5) to confirm the
operating time and to show standard
display.
ADJUST REMAINING TIME
The remaining time is the period, when the
preheater remains ON after ignition is switched
OFF.
If the ignition is switched OFF while the preheater
is ON, the remaining time can be adjusted.
1. Push selection button (3) or (6) to adjust
remaining time.
2. Push enter button (5) to confirm.
Preheater stops automatically after remaining
time is over. The remaining time will not be
to
PA1627 X3-45 Operator's Manual
saved. It has to be adjusted and confirmed every
further time. If the remaining time is not
confirmed within 10 seconds, the preheater
stops.
SET A STARTING TIME
1. Push menu-button (2) to show menu row at
the top of the display (1).
2. Push selection button (3) or (6) until setting
sign (A) is blinking.
3. Push enter button (5) to make starting time
number to appear.
4. Push selection button (3) or (6) to browse
the starting time numbers.
5. Push enter button (5) to choose the starting
time you wish to setup: display shows day
and time and next step day can be adjusted.
6. Push selection button (3) or (6) to adjust
day.
7. Push enter button (5) to confirm day.
8. Push selection button (3) or (6) to adjust
hours.
9. Push enter button (5) to confirm hours.
10. Push selection button (3) or
(6) to adjust minutes.
11. Push enter button (5) to
confirm minutes: standard
display appears.
Only in 12h-mode after adjustment of time:
12. Push selection button (3) or (6) to switch
between AM and PM.
13. Push enter button (5) to
confirm: standard display
appears.
NOTE
Seven starting times are available for a
period of seven days, but only one starting
time can be active.
For safety reasons a starting time can only be
activated for the same or next day.
Activation for Sunday and Monday is
possible on Friday; activation for Monday is
possible on Saturday.