PREVOST X3-45 COACH 2018 Operator's Manual page 71

N OTE
1 9 T
I f CAM or NAV is already activated, DVD, TV
1 9 T
or VIDEO IN cannot
displayed.
OPERATION OF THE OPTIONAL AUDIO–
VIDEO MODESTY PANEL
On some vehicles, it is possible to connect and
display on the main monitor a laptop or other
audio-video equipment (DVD player, gaming
console) from an optional audio-video modesty
panel located behind the driver's seat.
To do so, connect the laptop to the modesty
DB9 connector (9 pins, blue connector), select
Video IN on the Video and Sound Selector and
turn on the laptop presentation mode.
Devices using RCA connectors (DVD, gaming
console) can also be used by connecting them
to the 3 modesty RCA connectors and selecting
the Video and Sound Selector TV mode.
OPERATION OF THE PANORAMIC VIEW
CAMERA
1. Press
CAM
optional panoramic view camera
signal. The video section of the
vss-05
"CAM". The video monitors turn
on automatically.
2. Press CAM button again to turn
off the panoramic view camera
and
audio/video source.
DISPLAY OF THE
GUIDANCE SCREEN
Not applicable
N OTE
1 9 T
W hen CAM or NAV is selected, the previously
1 9 T
selected audio source remains active.
OPERATION OF THE DRIVER MICROPHONE
1. Press D-MIC button to turn on
the driver
audio section of the lcd panel will
show "D-MIC" and a gong sound
can be heard.
2. Turn volume knob to adjust
microphone level.
be selected and
button to select the
lcd panel will show
return to previous
GPS NAVIGATION
microphone. The
PA1627 X3-45 Operator's Manual
Controls and Instruments
3. Press D-MIC button again to turn
off the driver microphone.
OPERATION OF THE GUIDE MICROPHONE
1. Press G-MIC button to turn on
the guide microphone. The audio
section of the lcd panel will show
"G-MIC" and a gong sound can
be heard.
2. Turn volume knob to adjust
microphone level.
3. Press G-MIC button again to
turn off the guide microphone.
N OTE
1 9 T
BACKGROUND VOLUME ADJUSTMENT
W hen a microphone is activated, the current
1 9 T
audio source volume will reduce to a certain
level which has been set at the factory. To
adjust this level, proceed as follows:
1- P ress and hold AUDIO button then
1 9 T
press AUDIO IN button.
will show "BACK GROUND".
2- T urn the volume knob to adjust the
1 9 T
background level.
3- P ress any button to save the setting. If
1 9 T
no button is pressed within 8 seconds,
the unit automatically saves the setting
and exits this mode.
GONG SOUND LEVEL
A gong will sound in the passenger's area upon
1 9 T
activating of the microphone. This gong will also
sound when a passenger activates the service
bell. The gong sound level can be adjusted as
follows:
1- P ress and hold AUDIO button then
1 9 T
press VIDEO IN button.
will show "GONG PASS".
2- T urn the volume knob to adjust the gong
1 9 T
level.
3- P ress any button to save the setting. If
1 9 T
no button is pressed within 8 seconds,
the unit automatically saves the setting
and exits this mode.
N OTE
1 9 T
While maintaining the service bell gong active,
the gong sound heard upon activation of the
4-29
The LCD panel
1 9 T
The LCD panel
1 9 T