Starting The Vehicle After A Fire Alarm - PREVOST X3-45 COACH 2018 Operator's Manual

KIDDE IMAGES
STARTING THE VEHICLE AFTER A FIRE
ALARM
The vehicle may be started after a fire alarm
without resetting the system. Refer to ignition
switch sequence below. This will not reset the
system, rather it will instruct the vehicle's
multiplex system to ignore vehicle interface
outputs from the Protection Panel. This feature
is intended to be used only in emergency
situations that require the vehicle to be restarted
and moved a short distance prior to system
reset. It should not be performed if the cause of
the fire has not been clearly identified and
corrected.
Safety Features and Equipment
To start the vehicle, perform this ignition switch
(key) sequence.
 From the ON position,
 Turn to OFF, return to ON and START
PA1627 X3-45 Operator's Manual
vehicle within 2 seconds.
7-5