Other Features
5-34
The vehicle and lift are equipped with a
safety interlock system (i.e. transmission
into neutral, parking brake applied). Be
certain that it is in the proper mode before
attempting to operate lift. The lift will not
operate until this feature has been properly
engaged.
Turn on wheelchair lift power switch located
on the dashboard.
Enable lift control pendant by turning on
POWER switch located on pendant.
A person that uses the wheelchair lift while
standing (does not require mobility aid
equipment) is referred to in this manual as a
Standee.
WHEELCHAIR LIFT POSITIONS
CONTROL PENDANT
PA1627 X3-45 Operator's Manual