R. H. Dashboard Panel - PREVOST X3-45 COACH 2018 Operator's Manual

Controls and Instruments
4-24
The engine will return to fast idle once the parking brake is applied or neutral (n) selected.
Engine Brake
The vehicle's engine brake is by default set to automatic (AUTO
disable the engine brake (OFF mode) using this spring return switch.
Pressing this switch again will enable the engine brake and reset the default mode. Cycling
the ignition will have the same effect.
From AUTO mode, the driver can switch to Engine Brake LOW
mode by using the buttons on the steering wheel. Refer to ENGINE BRAKE in Section 5
06703
Other Features.
Engine Stop Override (with Automatic Fire Detection and Suppression System)
Press the Engine Stop Override switch on the dashboard or the Delay Engine Stop switch
on the AFSS protection panel to delay the engine shutdown and extinguisher discharge by
an additional 15 seconds.
CAUTION
06265
Use this function if you are not prepared to bring the vehicle to a safe stop (i.e. on a
railroad track, in intersection).
This switch is functional only if the vehicle is equipped with the Automatic Fire Detection and
Suppression System.

R. H. DASHBOARD PANEL

R . H. DASHBOARD PANEL
3 2 T 3 2 T
The HVAC control module as well as the cluster
dimmer switch, interior lighting control switches,
entrance door operating buttons as well as
miscellaneous control switches and air vents are
located on the R.H. dashboard panel.
06707_2
PA1627 X3-45 Operator's Manual
mode). It is possible to
or Engine Brake HIGH