A2.2 Configuration; A2.3 Enable Push Video; A2.3.1 From Ios Mobile Device (Iphone / Ipad) - Avtech 36CH XVR Series User Manual

A2.2 Configuration

Before configuring Push Video, make sure:
1. The system is set up as described in "2. CONNECTION" at page 3.
2. This recorder is connected to Internet.
3. You've installed the app, EagleEyes, on your iOS or Android mobile devices.
For details, please refer to "6.3 Mobile Devices" at page51.
Step1: Go to MENU  SCENARIO, and enable the necessary rules:
If your alarm sensor is...
External alarm sensor
PIR sensor built-in
Step2: Open EagleEyes, and add this recorder to the EagleEyes address book.

A2.3 Enable Push Video

A2.3.1 From iOS Mobile Device (iPhone / iPad)

Step1: In the iPhone / iPad main menu, select Settings  Notifications. Select EagleEyes, and make sure
the notification is set to on.
Please enable ...
1. PUSH VIDEO TRIGGERED BY EXTERNAL ALARM
2. MOTION DETECTION ON WHEN GUARD ON
1. PUSH VIDEO TRIGGERED BY BUILT-IN PIR SENSOR
2. MOTION DETECTION ON WHEN GUARD ON
3. INTERNAL ALARM (PIR) DETECTION ON WHEN GUARD ON
APPENDIX 2 PUSH VIDEO CONFIGURATION
56