Ip Camera - Avtech 36CH XVR Series User Manual

2.2.3 IP Camera

Note: Check the specifications of your recorder and see if your recorder supports IP camera
connection.
Step1: Prepare a switch / router, and connect the recorder and the IP camera to the router with RJ45 network cables.
Step2: Make sure your camera supports DHCP function to allow the connected router to assign an IP address to the
camera.
If your camera doesn't support this function, please check its user manual to know how to manually change
the IP address of your camera and make sure its IP address is in the same network segment as the one your
router uses.
Step3: Power on the camera.
Step4: On the recorder's live view, find
Note: You can also access IP SEARCH from MENU  CAMERA  CONNECTION.
You'll see the list of every connected IP camera with its connection status to this device and MAC address.
Click  to assign the camera to a channel from CH33 ~ CH36 automatically and choose ADD to complete.
ASSIGN EDIT DEVICE TYPE

CH35 IPCAM

IPCAM

IPCAM

IPCAM
on CH33 ~ CH36, and click
IP SEARCH
IP NETMASK
192.168.1.12 255.255.255.0
192.168.1.12 255.255.255.0
192.168.1.13 255.255.255.0
192.168.1.13 255.255.255.0
to go to the IP SEARCH page directly.
GATEWAY PRIMARY DNS
192.168.1.1 8.8.8.8
0.0.0.0 8.8.8.8
192.168.1.1 8.8.8.8
0.0.0.0 8.8.8.8
REFRESH
CONNECTION
PORT MAC
88 00:0E:53:31:06:E5
88 00:0E:53:31:06:E5
88 00:0E:53:31:15:D1
88 00:0E:53:31:15:D1
ADD
VENDOR
AVTECH
ONVIF
AVTECH
ONVIF
5